Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P001B00
    VOLVO

    ECM-P001B00 - Intake (A) Cam Profile Control Circuit Low (Bank 1). General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    5 modeller

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Vis modeller per årsmodell og motor (10)
    • Volvo S80 (2007–)2007–2010Kun motor: B6324S
    • Volvo S80 (2007–)2011–2015Kun motor: B6324S5
    • Volvo V70 (2008–)2008–2010Kun motor: B6324S
    • Volvo V70 (2008–)2011–2014Kun motor: B6324S5
    • Volvo XC60 (2009–)2010Kun motor: B6324S
    • Volvo XC60 (2009–)2011–2015Kun motor: B6324S5
    • Volvo XC70 (2008–)2008–2010Kun motor: B6324S
    • Volvo XC70 (2008–)2011–2015Kun motor: B6324S5
    • Volvo XC90 (2003–)2007–2010Kun motor: B6324S
    • Volvo XC90 (2003–)2011–2014Kun motor: B6324S5

    Hva betyr feilkoden?

    The engine control module checks the control signal to the cam profile valves on the intake side, bank 1, and controls the variable cam profiles. The code is set when the control signal is too low, and it is tested with the ignition on. It is a general fault with no more specific description.

    Mulige årsaker

    • Dirty or damaged cam profile solenoid
    • Signal wire shorted to ground

    Hva du kan gjøre

    1. 1Read the code, clear it and road test the car to see whether it returns
    2. 2Use a multimeter to check that the signal wire to the solenoid is not shorted to ground
    3. 3Check the connector at the solenoid for loose or corroded parts
    4. 4Have a workshop clean the cam profile solenoid, since metal casting residue in the oil can make it stick
    5. 5If you have a diagnostic tool: read the fault status once the diagnosis is complete, where it should show that no fault is found
    6. 6If the fault returns: have a workshop replace the cam profile solenoid if it still malfunctions after two cleanings

    Symptomer du kan merke5

    • Emissions warning lamp lit
    • Uneven idle
    • Engine is hard to start
    • Higher fuel consumption
    • Reduced performance

    Hva feilen kan påvirke1

    • The variable cam profile on both banks switches to the low-lift position

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.