VOLVO
ECM-P002400 - Controlling camshaft position exhaust - too much control- (bank 2). General fault information. No information about fault type
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS80 (2007–), XC90 (2003–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The code concerns the exhaust camshaft on bank 2, which is controlled too far out. The engine control module sets the code when control is too slow while the camshaft is being returned. If oil pressure is too low, a spring in the VVT unit can push the camshaft out too far. The code is set with the engine warm and camshaft control active.
Mulige årsaker
- Poor quality engine oil
- Low oil pressure
- Damaged exhaust camshaft control valve
- Damaged VVT unit
Hva du kan gjøre
- 1If there is a stored code for the crankshaft-to-camshaft correlation, diagnose that one first
- 2Check the engine oil level and quality, especially if it may be contaminated
- 3Have a workshop measure the oil pressure, since low pressure can let the camshaft be pushed out too far
- 4Have a workshop remove the control valve for cleaning and check the oil passages in the cylinder head
- 5If the fault remains: have a workshop try a new control valve
- 6If the fault returns: have a workshop check the VVT unit
Symptomer du kan merke4
- Uneven idle
- Higher emissions
- Engine stalls while driving
- Check engine lamp lit or behaving abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.