Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P002777
    VOLVO

    ECM-P002777 - Exhaust Valve Control Solenoid Circuit Range/Performance (Bank 1). Mechanical Failures. Commanded position not reachable

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    3 modeller

    S60 (2011–), S80 (2007–), V70 (2008–)

    Vis modeller per årsmodell og motor (9)
    • Volvo S60 (2011–)2011–2012Kun motor: B5254T5
    • Volvo S80 (2007–)2007–2008Kun motor: B5254T6
    • Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
    • Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
    • Volvo S80 (2007–)2012Kun motor: B5254T10
    • Volvo V70 (2008–)2008Kun motor: B5254T6
    • Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
    • Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
    • Volvo V70 (2008–)2012Kun motor: B5254T10

    Hva betyr feilkoden?

    The engine control module monitors the exhaust camshaft position and has found that it does not match the commanded position, so the camshaft cannot reach it. The code concerns the control solenoid for the exhaust valve on bank 1. It is a mechanical fault, and camshaft control is switched off.

    Mulige årsaker

    • Low engine oil pressure
    • Poor quality engine oil
    • Sticking exhaust camshaft control valve
    • Mechanical fault in the VVT unit

    Hva du kan gjøre

    1. 1Check the fuse for the supply voltage to the exhaust camshaft control valve
    2. 2Check the engine oil level and quality, especially that it is not contaminated
    3. 3Have a workshop measure the oil pressure
    4. 4If you have a diagnostic tool: activate exhaust camshaft control and see whether it responds
    5. 5If the fault remains: have a workshop clean the control valve and check the oil passages in the cylinder head
    6. 6If the fault returns after this: have a workshop replace the control valve and check the VVT unit

    Symptomer du kan merke4

    • Check engine lamp lit or behaving abnormally
    • Engine is hard to start and cranks slowly
    • The car lacks power
    • Engine hesitates or runs jerkily on acceleration and at steady speed

    Hva feilen kan påvirke1

    • Camshaft control is switched off

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.