VOLVO
ECM-P003C00 - Intake (A) Camshaft Profile Control Performance or Stuck Off (Bank 1). General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (10)
- Volvo S80 (2007–)2007–2010Kun motor: B6324S
- Volvo S80 (2007–)2011–2015Kun motor: B6324S5
- Volvo V70 (2008–)2008–2010Kun motor: B6324S
- Volvo V70 (2008–)2011–2014Kun motor: B6324S5
- Volvo XC60 (2009–)2010Kun motor: B6324S
- Volvo XC60 (2009–)2011–2015Kun motor: B6324S5
- Volvo XC70 (2008–)2008–2010Kun motor: B6324S
- Volvo XC70 (2008–)2011–2015Kun motor: B6324S5
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
The variable intake cam profile is controlled by one valve per bank. Here the intake manifold pressure is higher than expected for bank 1, which in this function covers cylinders 1, 2 and 4.
Mulige årsaker
- Dirty or damaged cam profile solenoid
- Blocked oil passages for the variable cam profile
Hva du kan gjøre
- 1Read the fault code with a diagnostic tool and note whether it is active now or only stored
- 2If you have a diagnostic tool, activate the cam profile solenoid for bank 1 and see whether it responds
- 3Check the connector and wiring to the bank 1 solenoid for looseness, corrosion and damage
- 4Impurities or cast debris in the oil can make the solenoid stick. Cleaning is usually enough, but a workshop should do it because the solenoid has to be removed
- 5Replace the solenoid if the fault remains after two cleanings
Symptomer du kan merke4
- Malfunction indicator lamp (MIL) lights up
- Uneven idle
- Engine is hard to start
- Poor performance
Hva feilen kan påvirke1
- Both banks of the variable cam profile end up in low lift
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.