Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P005200
    VOLVO

    ECM-P005200 - HO2S Heater Control Circuit High (Bank 2, Sensor 1). General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    5 modeller

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Vis modeller per årsmodell og motor (13)
    • Volvo S80 (2007–)2007–2010Kun motor: B6324S, B8444S
    • Volvo S80 (2007–)2011Kun motor: B6324S5, B8444S
    • Volvo S80 (2007–)2012–2015Kun motor: B6324S5
    • Volvo V70 (2008–)2008–2010Kun motor: B6324S
    • Volvo V70 (2008–)2011–2014Kun motor: B6324S5
    • Volvo XC60 (2009–)2010Kun motor: B6324S
    • Volvo XC60 (2009–)2011–2015Kun motor: B6324S5
    • Volvo XC70 (2008–)2008–2010Kun motor: B6324S
    • Volvo XC70 (2008–)2011–2015Kun motor: B6324S5
    • Volvo XC90 (2003–)2005–2006Kun motor: B8444S
    • Volvo XC90 (2003–)2007–2010Kun motor: B6324S, B8444S
    • Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S
    • Volvo XC90 (2003–)2012–2014Kun motor: B6324S5

    Hva betyr feilkoden?

    The engine control module checks the preheating circuit of the front oxygen sensor on bank 2, the back cylinder row beside the cabin, namely cylinders 2, 4, 6 and 8. The code is set when the circuit is short-circuited to supply voltage, and the check can be made with the ignition on.

    Mulige årsaker

    • Power lead short-circuited to supply voltage
    • Damaged front heated oxygen sensor

    Hva du kan gjøre

    1. 1Read the fault status with a diagnostic tool when the diagnostic is complete. A status of Fault found shows the fault is present now
    2. 2Make sure the fuses are intact. Their locations are on the fuse chart or in the instruction manual
    3. 3Look at the lead to the front oxygen sensor on bank 2 for chafing or pinch damage where it could touch a live wire
    4. 4With a multimeter, check that the power lead is not short-circuited to supply voltage
    5. 5Replace the front oxygen sensor if the fault remains and the wiring is intact

    Symptomer du kan merke1

    • The malfunction indicator lamp lights up

    Hva feilen kan påvirke2

    • Lambda control is switched off
    • Preheating of the front oxygen sensor is switched off

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.