Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P00531E
    VOLVO

    ECM-P00531E - HO2S Heater Resistance (Bank 1, Sensor 1). General Electrical Failures. Circuit resistance out of range

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    6 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–)

    Vis modeller per årsmodell og motor (11)
    • Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3
    • Volvo S60 (2011–)2012–2015Kun motor: B4164T, B4164T2, B4164T3
    • Volvo S80 (2007–)2011, 2015Kun motor: B4164T
    • Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2
    • Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
    • Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
    • Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
    • Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3
    • Volvo V60 (2011–)2012–2015Kun motor: B4164T, B4164T2, B4164T3
    • Volvo V70 (2008–)2011Kun motor: B4164T
    • Volvo V70 (2008–)2012–2015Kun motor: B4164T, B4164T2

    Hva betyr feilkoden?

    The engine control module finds that the control of the heater element in the front oxygen sensor on bank 1, sensor 1, has not worked for a certain period. The code belongs to electrical faults where the resistance is wrong.

    Mulige årsaker

    • Oxidised connectors with raised contact resistance
    • The front oxygen sensor is damaged

    Hva du kan gjøre

    1. 1Make sure the fuses are intact. Their location is on the fuse chart or in the instruction manual
    2. 2Read the fault code with a diagnostic tool with the engine running and see whether it is active
    3. 3Check the connector on the front oxygen sensor for bank 1 sensor 1 for oxidation and contact resistance
    4. 4With a multimeter, check that the wiring to the sensor has no open circuit and no short to ground or supply
    5. 5Replace the front oxygen sensor if the fault remains after checking the connector and wiring
    6. 6Have a workshop with diagnostic equipment check the control of the heater element if the fault comes back

    Symptomer du kan merke1

    • The Check engine lamp lights up or behaves abnormally

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.