Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P005600
    VOLVO

    ECM-P005600 - HO2S Heater Control Circuit (Bank 2, Sensor 2). General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    5 modeller

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Vis modeller per årsmodell og motor (12)
    • Volvo S80 (2007–)2010Kun motor: B6324S, B8444S
    • Volvo S80 (2007–)2011Kun motor: B6324S5, B8444S
    • Volvo S80 (2007–)2012–2015Kun motor: B6324S5
    • Volvo V70 (2008–)2010Kun motor: B6324S
    • Volvo V70 (2008–)2011–2014Kun motor: B6324S5
    • Volvo XC60 (2009–)2010Kun motor: B6324S
    • Volvo XC60 (2009–)2011–2015Kun motor: B6324S5
    • Volvo XC70 (2008–)2010Kun motor: B6324S
    • Volvo XC70 (2008–)2011–2015Kun motor: B6324S5
    • Volvo XC90 (2003–)2010Kun motor: B8444S
    • Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S
    • Volvo XC90 (2003–)2012–2014Kun motor: B6324S5

    Hva betyr feilkoden?

    Although the code is named as a heater control circuit, it concerns how quickly the rear oxygen sensor on bank 2, sensor 2, responds. The engine control module actively switches between rich and lean fuel and air mixture and compares how closely the sensor signal follows those switches. The sensor is judged too slow if it reacts too slowly when the mixture goes from rich to lean.

    Mulige årsaker

    • Contact resistance or oxidation in the connectors
    • Damaged rear heated oxygen sensor

    Hva du kan gjøre

    1. 1Read the fault code with a diagnostic tool after a test drive and note whether it is active
    2. 2Make sure the fuses are intact. Their location is given in the instruction manual
    3. 3If you have a diagnostic tool, follow the rear oxygen sensor signal in live data during a test drive and see whether it switches between rich and lean without delay
    4. 4Look for contact resistance and oxidation in the connector to the rear oxygen sensor on bank 2 sensor 2
    5. 5If the connector is clean and intact but the signal is still slow, replace the rear oxygen sensor

    Symptomer du kan merke1

    • The Check engine (malfunction indicator) lamp lights up or behaves abnormally

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.