Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P005700
    VOLVO

    ECM-P005700 - HO2S Heater Control Circuit Low (Bank 2, Sensor 2). General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    5 modeller

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Vis modeller per årsmodell og motor (13)
    • Volvo S80 (2007–)2007–2010Kun motor: B6324S, B8444S
    • Volvo S80 (2007–)2011Kun motor: B6324S5, B8444S
    • Volvo S80 (2007–)2012–2015Kun motor: B6324S5
    • Volvo V70 (2008–)2008–2010Kun motor: B6324S
    • Volvo V70 (2008–)2011–2014Kun motor: B6324S5
    • Volvo XC60 (2009–)2010Kun motor: B6324S
    • Volvo XC60 (2009–)2011–2015Kun motor: B6324S5
    • Volvo XC70 (2008–)2008–2010Kun motor: B6324S
    • Volvo XC70 (2008–)2011–2015Kun motor: B6324S5
    • Volvo XC90 (2003–)2005–2006Kun motor: B8444S
    • Volvo XC90 (2003–)2007–2010Kun motor: B6324S, B8444S
    • Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S
    • Volvo XC90 (2003–)2012–2014Kun motor: B6324S5

    Hva betyr feilkoden?

    The engine control module monitors the preheating of the rear oxygen sensor on bank 2, sensor 2. The fault is registered when the lead is short-circuited to ground, when there is an open circuit, or when the heater resistance is wrong. While the fault is present, preheating of the rear sensor is switched off.

    Mulige årsaker

    • Contact resistance or oxidation in the connectors
    • The power lead is short-circuited to ground
    • Open circuit in the power lead
    • Damaged rear heated oxygen sensor

    Hva du kan gjøre

    1. 1With the ignition on, read the fault status with a diagnostic tool once the diagnostic is complete. A status of Fault found means the fault is present now
    2. 2Do not use rust solvent spray or grease on the oxygen sensor connector
    3. 3Look for oxidation and contact resistance at the connector of the rear oxygen sensor on bank 2
    4. 4With a multimeter, check that the preheating lead is not short-circuited to ground and has no open circuit
    5. 5Replace the rear oxygen sensor if the fault remains after checking the connector and wiring

    Symptomer du kan merke1

    • The malfunction indicator lamp lights up

    Hva feilen kan påvirke1

    • Preheating of the rear oxygen sensor is switched off

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.