VOLVO
ECM-P006A64 - MAP - Mass or Volume Air Flow Correlation. Algorithm Based Failures. Signal plausibility failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
Although the code is named as an implausible signal, it concerns the air mass correction factor, which becomes too high. The engine control module works out the expected air mass from several parameters and compares it with the sensor's reading. The fault is set when the factor is too high while the lambda adaptation sits outside a set band.
Mulige årsaker
- Poor contact or oxidation at the air flow sensor connectors
- Air leakage in the intake system
- The intake system is blocked
- The mass air flow sensor is damaged
Hva du kan gjøre
- 1Make sure the mass air flow sensor connector is firmly seated and free from oxidation
- 2Look for leaks in the hoses between the mass air flow sensor and the throttle unit, especially at the connections
- 3Check that the intake system is not blocked by contamination, particularly in the throttle
- 4If you have a diagnostic tool, check that the mass air flow reading in live data is plausible for the engine speed at idle
- 5Have a workshop check the mass air flow sensor if the fault remains after checking the intake system
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke3
- Air mass is calculated instead of measured
- Control of the rear oxygen sensor is switched off
- The misfire diagnostic is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.