VOLVO
ECM-P006B00 - MAP - Exhaust Pressure Correlation. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
Although the code is named exhaust pressure, it concerns the intake pressure. The engine control module follows the pressure in the intake manifold with the pressure sensor (MAP) and compares it with a calculation model. The code is set when the difference between the actual intake pressure and the model is too large.
Mulige årsaker
- Contact resistance or oxidation in the connectors
- The pressure sensor (MAP) is faulty
Hva du kan gjøre
- 1Read the fault code with a diagnostic tool with the ignition in position II and note whether it is active
- 2Check the MAP sensor connector for contact resistance and oxidation
- 3If you have a diagnostic tool, compare the intake pressure in live data with the ignition on and the engine off. The value should be close to ambient pressure
- 4Have a workshop check the pressure sensor if the fault remains after the connector has been checked
Symptomer du kan merke1
- The Check engine (malfunction indicator) lamp lights up or behaves abnormally
Hva feilen kan påvirke1
- Exhaust gas recirculation (EGR) control is lost
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.