VOLVO
ECM-P007000 - Ambient Air Temperature Sensor Circuit. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (14)
- Volvo S60 (2011–)2011–2014Kun motor: B6304T4
- Volvo S60 (2011–)2015Kun motor: B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007Alle motorer unntatt: B5254T6, B8444S
- Volvo S80 (2007–)2008–2009Kun motor: B6304T2, B6324S, D5244T4, D5244T5
- Volvo V60 (2011–)2011–2014Kun motor: B6304T4
- Volvo V60 (2011–)2015Kun motor: B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2008–2009Kun motor: B6304T2, B6324S, D5244T4, D5244T5
- Volvo XC60 (2009–)2009
- Volvo XC60 (2009–)2010Kun motor: B6304T2
- Volvo XC60 (2009–)2011–2015Kun motor: B6304T4
- Volvo XC70 (2008–)2008–2009
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S
- Volvo XC90 (2003–)2011–2012Kun motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle motorer unntatt: B5254T9
Hva betyr feilkoden?
The engine control module measures the outside air temperature with a sensor in the left outer mirror and checks the sensor circuit. The code is set when the circuit is short-circuited to ground or supply voltage, or has an open circuit. The wrong value must last for a set period and across two or more consecutive drive cycles.
Mulige årsaker
- Open circuit in the CAN network, meaning communication between control modules
- Open circuit in the signal or ground lead
- Contact resistance and oxidation in the connectors
- The signal lead is short-circuited to supply voltage
Hva du kan gjøre
- 1Read the fault code with a diagnostic tool with the ignition on and note whether it is active
- 2Look at the connector to the sensor in the left outer mirror for loose connections, oxidation and damage
- 3Look for chafing and pinch damage on the sensor lead in the mirror
- 4With a multimeter, check that the signal lead is not short-circuited to ground or supply voltage and has no open circuit
- 5If there are faults in other control modules too, the CAN network may be the cause, and a workshop is best placed to check it
Symptomer du kan merke4
- Air conditioning does not work
- Temperature control of the heating does not work
- The outside temperature gauge shows the wrong value or does not work
- The malfunction indicator lamp lights up
Hva feilen kan påvirke2
- The intake air temperature sensor value is used instead, if that sensor works
- Otherwise a constant value is used
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.