VOLVO
ECM-P007117 - Ambient Air Temperature Sensor Range/Performance. General Electrical Failures. Circuit voltage above threshold
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerS60 (2011–), S80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10
Hva betyr feilkoden?
The code is set when the outside temperature sensor shows a temperature at start that is too high compared with the other sensors. The engine control module then stores the readings from the outside, intake and engine temperature sensors at that moment. Although the code names high voltage, it concerns the mismatch between the sensors.
Mulige årsaker
- Damaged outside temperature sensor
- Oxidised connections with contact resistance
Hva du kan gjøre
- 1Read the fault code with a diagnostic tool with the engine running and note whether it is active
- 2Make sure the fuses are intact. Their location is in the instruction manual
- 3If you have a diagnostic tool, compare the outside temperature in live data with the intake temperature after starting. The readings should be roughly the same
- 4Check the connector to the outside temperature sensor for contact resistance and oxidation
- 5Have a workshop check the sensor if the fault remains after checking the connector and wiring
Symptomer du kan merke1
- The outside temperature is displayed as too high
Hva feilen kan påvirke1
- The outside temperature is calculated from a model
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.