Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P007121
    VOLVO

    ECM-P007121 - Ambient Air Temperature Sensor Circuit "A" Range/Performance. General Signal Failures. Signal too low

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    8 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (8)
    • Volvo S60 (2011–)2014–2015Kun motor: D4204T5
    • Volvo S80 (2007–)2014–2015Kun motor: D4204T5
    • Volvo V40 (2013–)2015Kun motor: D4204T14
    • Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
    • Volvo V60 (2011–)2014–2015Kun motor: D4204T5
    • Volvo V70 (2008–)2014–2015Kun motor: D4204T5
    • Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
    • Volvo XC70 (2008–)2014–2015Kun motor: D4204T5

    Hva betyr feilkoden?

    The code indicates a low signal from outside temperature sensor A, and the condition is that the value deviates too much from the other sensors. After the engine has been off for a long time, the engine control module compares the outside temperature with the air temperature in the mass air flow sensor, the boost pressure sensor temperature, the coolant, the oil and the intake manifold temperature sensor.

    Mulige årsaker

    • Contact resistance in the sensor connector
    • Outside temperature sensor A is damaged

    Hva du kan gjøre

    1. 1If you have a diagnostic tool, read the outside temperature in live data with the ignition on and see whether the value is plausible
    2. 2Read the fault code with a diagnostic tool and note whether it is active or only stored
    3. 3With the ignition off, check the sensor connector and terminals for contact resistance and oxidation
    4. 4Correct what you find in the connector and make sure it is firmly seated
    5. 5If the connector is clean and the fault remains, have a workshop check the sensor

    Symptomer du kan merke1

    • No noticeable symptoms for the driver

    Hva feilen kan påvirke1

    • The outside temperature is calculated instead of measured

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.