VOLVO
ECM-P007122 - Ambient Air Temperature Sensor Circuit "A" Range/Performance. General Signal Failures. Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The engine control module monitors outside temperature sensor A and, after a long stop, checks its reading against other temperatures in the car. The code is set when the signal is too high and the outside temperature therefore deviates too much from the other values.
Mulige årsaker
- Contact resistance in the connection
- Outside temperature sensor A is damaged
Hva du kan gjøre
- 1If you have a diagnostic tool, read the outside temperature in live data and compare it with the other temperatures in the car. The values should roughly agree
- 2Read the fault code with a diagnostic tool and note whether it is active or only stored
- 3Make sure the fuses are intact. Their location is given in the instruction manual
- 4With the ignition off, check the sensor connector for contact resistance and oxidation
- 5Have a workshop check the sensor if the fault remains after the connector has been checked
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- A calculated value is used for the outside temperature
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.