VOLVO
ECM-P007164 - Ambient Air Temperature Sensor Range/Performance. Algorithm Based Failures. Signal plausibility failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (22)
- Volvo S60 (2011–)2011–2012Kun motor: B6304T4
- Volvo S60 (2011–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2010Kun motor: B6304T2
- Volvo S80 (2007–)2011–2012, 2015Kun motor: B6304T4
- Volvo S80 (2007–)2013–2014Kun motor: B5254T12, B5254T14, B6304T4
- Volvo V40 (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Kun motor: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V60 (2011–)2011–2012Kun motor: B6304T4
- Volvo V60 (2011–)2013Kun motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Kun motor: B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Kun motor: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Kun motor: B6304T2
- Volvo V70 (2008–)2011–2012Kun motor: B6304T4
- Volvo V70 (2008–)2013–2015Kun motor: B5204T9, B6304T4
- Volvo XC60 (2009–)2010Kun motor: B6304T2
- Volvo XC60 (2009–)2011–2014Kun motor: B6304T4
- Volvo XC60 (2009–)2015Kun motor: B5204T9, B5254T12, B5254T14, B6304T4
- Volvo XC70 (2008–)2010Kun motor: B6304T2
- Volvo XC70 (2008–)2011–2015Kun motor: B6304T4
Hva betyr feilkoden?
An implausible reading from the sensor in the left door mirror is detected when its value differs too far from the intake, fuel or coolant temperature. This applies once the engine has run warm and has cooled properly.
Mulige årsaker
- Poor contact or contact resistance in the connector
- The outside temperature sensor is damaged
Hva du kan gjøre
- 1If you have a diagnostic tool, read the outside temperature in live data and compare it with the fuel temperature after the car has cooled
- 2Read the fault code with a diagnostic tool and note whether it is active
- 3With the ignition off, go through the connection to the sensor in the left door mirror and look for oxidation
- 4If the connector is clean and intact but the fault remains, the sensor is damaged and needs replacing
- 5Make sure the fuses are intact. Their location is given in the instruction manual
Symptomer du kan merke1
- The malfunction indicator lamp lights up
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.