VOLVO
ECM-P007216 - Ambient Air Temperature Sensor Circuit Low. General Electrical Failures. Circuit voltage below threshold
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
Although the code names an air temperature sensor, it concerns the signal from the outside temperature sensor, which the engine control module checks against the sensor's operating range. The code is set when that signal is too low.
Mulige årsaker
- The outside temperature sensor is damaged
- The signal lead is short-circuited to ground
- Open circuit in the signal lead
Hva du kan gjøre
- 1Read the fault code with a diagnostic tool with the ignition in position II and note whether it is active
- 2Make sure the fuses are intact. Their location is given in the instruction manual
- 3If you have a diagnostic tool, read the outside temperature in live data and check that the value follows the surroundings
- 4Follow the lead from the sensor and look for breaks or pinch damage, especially where it moves
- 5With a multimeter, check that the signal lead is not short-circuited to ground and has no open circuit. Replace the sensor if the wiring is intact but the fault remains
Symptomer du kan merke1
- The outside temperature display is wrong or absent
Hva feilen kan påvirke1
- A predefined value is used instead
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.