Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P007284
    VOLVO

    ECM-P007284 - Ambient Air Temperature Sensor Circuit Low Input. Bus Signal / Message Failures. Signal below allowable range

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    3 modeller

    S60 (2011–), S80 (2007–), V70 (2008–)

    Vis modeller per årsmodell og motor (9)
    • Volvo S60 (2011–)2011–2012Kun motor: B5254T5
    • Volvo S80 (2007–)2007–2008Kun motor: B5254T6
    • Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
    • Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
    • Volvo S80 (2007–)2012Kun motor: B5254T10
    • Volvo V70 (2008–)2008Kun motor: B5254T6
    • Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
    • Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
    • Volvo V70 (2008–)2012Kun motor: B5254T10

    Hva betyr feilkoden?

    Although the code is named a bus or message fault, it concerns the outside temperature signal being below the sensor's allowed range. The engine control module compares the signal with the sensor's operating range and sets the code when it is too low.

    Mulige årsaker

    • The sensor is damaged
    • The signal lead has a short circuit to ground
    • There is an open circuit in the signal lead

    Hva du kan gjøre

    1. 1Read the fault code with a diagnostic tool with the ignition in position II and note whether it is active or only stored
    2. 2Make sure the fuses are intact. Their location is on the fuse chart or in the instruction manual
    3. 3If you have a diagnostic tool, read the outside temperature in live data with the ignition on and see whether it is too low compared with the surroundings
    4. 4With the ignition off, check the sensor connector and connections for oxidation and loose contacts
    5. 5With a multimeter, check that the signal lead is not short-circuited to ground and has no open circuit. Have a workshop check the sensor if the fault remains

    Symptomer du kan merke2

    • The outside temperature gauge does not work
    • The outside temperature is displayed as too low

    Hva feilen kan påvirke1

    • A predefined value is used instead

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.