VOLVO
ECM-P007B16 - Charge Air Cooler Temperature Sensor Circuit Range/Performance (Bank 1). General Electrical Failures. Circuit voltage below threshold
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The boost pressure sensor (TMAP) measures both boost pressure and air temperature at the charge air cooler. The engine control module (ECM) tracks the temperature signal at high and at low boost and compares it with a model. The fault code is set when the temperature signal does not match the model.
Mulige årsaker
- Contact resistance, oxidation or loose connection in the connector to the boost pressure sensor
- Internal short circuit in the boost pressure sensor (TMAP)
- Damaged boost pressure sensor (TMAP)
Hva du kan gjøre
- 1Check the connector to the boost pressure sensor for oxidation, loose contacts and contact resistance
- 2Look for damage or chafing on the wire at the sensor and check that the connector is secure
- 3If you have a diagnostic tool: with the engine off, compare the boost pressure sensor temperature in live data with the ambient temperature. A clear difference suggests the sensor is faulty
- 4If the connector is in good condition but the fault remains, have a workshop check the boost pressure sensor and replace it if needed
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- The engine control module uses a calculated value instead of the measured temperature
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.