VOLVO
ECM-P007B26 - Charge Air Cooler Temperature Sensor Circuit Range/Performance (Bank 1). General Signal Failures. Signal rate of change below threshold
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The fault code concerns how quickly the temperature signal from the boost pressure sensor changes. When the rate of change falls below a limit, the signal is considered unstable and the fault code is set. The check runs with the engine running.
Mulige årsaker
- Loose connection, contact resistance or oxidation in the connector
- Damaged boost pressure sensor (TMAP)
Hva du kan gjøre
- 1Check the boost pressure sensor connector for looseness, since play gives an uneven signal
- 2Look for chafed or pinched wiring running to the sensor
- 3If you have a diagnostic tool: read the sensor temperature in live data while driving and check whether it rises under hard acceleration and falls again when cruising gently
- 4Have a workshop check the boost pressure sensor if the connector and wiring are in order but the fault remains
Symptomer du kan merke1
- The engine may hesitate, surge or run jerkily while driving
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.