VOLVO
ECM-P008000 - Exhaust Valve Control Circuit High (Bank 1). General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (28)
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5
- Volvo S60 (2011–)2013Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6, B8444S
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8, B8444S
- Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8, B8444S
- Volvo S80 (2007–)2012Kun motor: B5254T10
- Volvo S80 (2007–)2013Kun motor: B5254T12, B5254T14
- Volvo S80 (2007–)2014Kun motor: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14
- Volvo S80 (2007–)2015Kun motor: B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Kun motor: B4204T11, B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B4164T, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2013Kun motor: B5204T8, B5204T9
- Volvo V60 (2011–)2014Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12
- Volvo V60 (2011–)2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10
- Volvo V70 (2008–)2013Kun motor: B5204T9
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11, B5204T9
- Volvo XC60 (2009–)2014Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC60 (2009–)2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B5254T14
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11
- Volvo XC90 (2003–)2005–2011Kun motor: B8444S
Hva betyr feilkoden?
The engine control module (ECM) adjusts the exhaust camshaft position with a changeover valve on bank 1, the cylinder row nearest the front. The fault code is set when the control signal to the valve is too high. The causes are a signal wire shorted to voltage or a damaged valve.
Mulige årsaker
- Signal wire to the changeover valve shorted to voltage
- Damaged exhaust camshaft changeover valve
Hva du kan gjøre
- 1Read off the fault code and check whether the fault is active right now or has only been present earlier
- 2Check that the fuses for the engine control circuits are intact
- 3Use a multimeter to check whether the signal wire to the exhaust valve has contact with voltage with the ignition off
- 4Check the connector at the exhaust valve and the wiring leading to it
- 5If you have a diagnostic tool, activate the exhaust valve and listen or feel for it responding
- 6If the fault returns after these checks, have a workshop check the valve
Symptomer du kan merke4
- Check engine lamp (MIL) lights up
- Uneven idle
- Poor performance and lack of power
- The engine can stall while driving, during acceleration, deceleration or at steady speed
Hva feilen kan påvirke1
- Exhaust camshaft control is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.