VOLVO
ECM-P008A21 - Low Pressure Fuel System Pressure - Too Low. General Signal Failures. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The engine control module (ECM) controls fuel pressure through the fuel pump control module and requests a target pressure. The fault code is set when the pressure reported by the sensor stays too low against the requested pressure for a certain time, while the engine runs. The causes can be faults in connections or the pump circuit, leaks or air in the fuel lines, or a damaged sensor or pump.
Mulige årsaker
- Contact resistance, oxidation or open circuit in the connections
- Fuel pump supply wire shorted to ground
- Open circuit in the voltage supply to the fuel pump
- Leak in the fuel lines
- Air in the fuel lines
- Damaged fuel pressure sensor, fuel pump or fuel pump control module
Hva du kan gjøre
- 1Check the fuse for the fuel pump. If it has blown, use a multimeter to check that the wire is not shorted to ground
- 2Check the connectors at the fuel pump and the fuel pressure sensor for contact resistance and oxidation
- 3Look for leaks in the fuel lines
- 4If you have a diagnostic tool: read the fuel pressure in live data with the engine running and see whether it stays at a lower level than the requested pressure
- 5Have a workshop measure the fuel pressure with a gauge and check the fuel pressure sensor, the fuel pump and its control module
Symptomer du kan merke4
- Check engine lamp (MIL) lights up
- Poor performance and lack of power, especially when pulling away
- The engine can stall while driving
- The engine may hesitate, surge or run jerkily while driving
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.