VOLVO
ECM-P009622 - Intake Air Temperature Sensor 2 Circuit Range/Performance (Bank 1). General Signal Failures. Signal too high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (29)
- Volvo S60 (2011–)2011–2012Kun motor: B6304T4
- Volvo S60 (2011–)2013Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2014Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Alle motorer unntatt: B4164T, B4164T2, B4164T3, D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2010Kun motor: B6304T2
- Volvo S80 (2007–)2011–2012Kun motor: B6304T4
- Volvo S80 (2007–)2013Kun motor: B5254T12, B5254T14, B6304T4
- Volvo S80 (2007–)2014Kun motor: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, D4204T5
- Volvo S80 (2007–)2015Kun motor: B4204T11, B4204T12, B4204T15, B6304T4, D4204T5
- Volvo V40 (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Kun motor: B4204T11, B5204T8, B5204T9, D4204T14
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B4164T, D4162T, D5204T6
- Volvo V60 (2011–)2011–2012Kun motor: B6304T4
- Volvo V60 (2011–)2013Kun motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4, D4204T5
- Volvo V60 (2011–)2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Kun motor: B6304T2
- Volvo V70 (2008–)2011–2012Kun motor: B6304T4
- Volvo V70 (2008–)2013Kun motor: B5204T9, B6304T4
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11, B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2010Kun motor: B6304T2
- Volvo XC60 (2009–)2011–2013Kun motor: B6304T4
- Volvo XC60 (2009–)2014Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B5254T14, B6304T4, D4204T5
- Volvo XC70 (2008–)2010Kun motor: B6304T2
- Volvo XC70 (2008–)2011–2013Kun motor: B6304T4
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, B6304T4, D4204T5
Hva betyr feilkoden?
The boost pressure sensor measures the air temperature between the turbocharger and the throttle. The engine control module (ECM) compares it with the coolant temperature, the outside temperature and the mass air flow sensor value. The fault code is set when the reading deviates too much and the signal is too high.
Mulige årsaker
- Contact resistance in the connector
- Damaged air temperature sensor, built into the boost pressure sensor
- Signal wire shorted to voltage
- Damaged air pressure and air temperature sensor, which is the boost pressure sensor
Hva du kan gjøre
- 1Use a multimeter to check that the signal wire from the sensor has no voltage with the ignition off
- 2Check the boost pressure sensor connector for contact resistance and oxidation
- 3If you have a diagnostic tool: compare the air temperature from the boost pressure sensor with the mass air flow sensor value in live data with the engine running
- 4Have a workshop check the boost pressure sensor if the fault returns
Symptomer du kan merke3
- The car lacks power, especially when pulling away
- The engine hesitates, surges or runs jerkily while driving
- Check engine lamp (MIL) lights up
Hva feilen kan påvirke1
- The air temperature between the turbo and the throttle is set equal to the mass air flow sensor value
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.