Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P00C000
    VOLVO

    ECM-P00C000 - Turbocharger/Supercharger Bypass Valve "B" Control Circuit. General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    8 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (8)
    • Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15
    • Volvo V40 (2013–)2015Kun motor: B4204T11
    • Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11
    • Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo V70 (2008–)2014–2015Kun motor: B4204T11
    • Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo XC70 (2008–)2014–2015Kun motor: B4204T11

    Hva betyr feilkoden?

    The ECM watches the voltage supplied to the bypass valve that controls the boost compressor. The code is stored when the signal from the valve is incorrect, and While the fault is active the compressor is switched off, which causes a clear loss of performance.

    Mulige årsaker

    • Signal wire shorted to ground
    • Signal wire shorted to supply voltage
    • Contact resistance or corrosion in the connections
    • Open circuit in the signal or ground wire

    Hva du kan gjøre

    1. 1Read and note the code, clear it and road test to see whether it returns
    2. 2Check the connector at the bypass valve: it should be fully engaged, free from corrosion and moisture, and undamaged
    3. 3Look for chafed, pinched or loose wiring running from the valve to the engine control module
    4. 4If you have diagnostic equipment, activate the bypass valve and check that it moves
    5. 5With a multimeter, check that the signal wire has no open circuit and is not shorted to ground or supply voltage
    6. 6If the fault remains, have a workshop check the valve and its control

    Symptomer du kan merke3

    • Engine warning lamp (check engine) lit or behaving abnormally
    • The engine lacks power and runs poorly
    • Text message in the display

    Hva feilen kan påvirke2

    • The boost compressor is switched off
    • Engine performance is reduced

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.