Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P00C200
    VOLVO

    ECM-P00C200 - Turbocharger/Supercharger Bypass Valve "B" Control Circuit High. General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    8 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (8)
    • Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15
    • Volvo V40 (2013–)2015Kun motor: B4204T11
    • Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11
    • Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo V70 (2008–)2014–2015Kun motor: B4204T11
    • Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo XC70 (2008–)2014–2015Kun motor: B4204T11

    Hva betyr feilkoden?

    The ECM reads the position sensor signal for the compressor bypass valve. The code is stored when the control signal is too high, and The main cause is a short circuit to supply voltage in the control wiring, which can switch off the compressor and reduce performance at low engine speeds.

    Mulige årsaker

    • Signal wire shorted to supply voltage

    Hva du kan gjøre

    1. 1Read and note the code, clear it and road test to see whether it returns
    2. 2Check the connector at the bypass valve: it should be fully engaged and free from damage
    3. 3Look for chafed wiring that could be touching a live supply wire
    4. 4With a multimeter, check that the signal wire is not shorted to supply voltage
    5. 5If you have diagnostic equipment, read the bypass valve position in live data and check that it changes when the throttle is varied
    6. 6If the fault remains, have a workshop check the valve and its position sensor

    Symptomer du kan merke2

    • Engine lacks power, especially when pulling away from a standstill
    • Engine hesitates, surges or runs unevenly during acceleration, deceleration and steady speed

    Hva feilen kan påvirke2

    • The compressor is switched off
    • Performance drops at low engine speeds

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.