VOLVO
ECM-P010013 - Mass or Volume Air Flow Circuit. General Electrical Failures. Circuit open
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The ECM checks the signal ground to the mass air flow sensor and stores the code when it is incorrect. This fault is an open circuit, meaning a wire has broken or a connection has lost contact. It can be in the connections, the supply or the ground.
Mulige årsaker
- Contact resistance, corrosion or a break in the connections
- Break in the voltage supply
- Break in the ground wire
Hva du kan gjøre
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check that the connectors at the mass air flow sensor and in the connections are fully seated and free from corrosion
- 3With a multimeter, check that the supply and ground wires to the sensor have continuity
- 4Look for broken or chafed wiring between the sensor and the engine control module
- 5If the fault remains, have a workshop check the connections and the sensor
Symptomer du kan merke1
- Engine warning lamp (check engine) lit or behaving abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.