Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P010068
    VOLVO

    ECM-P010068 - Mass or Volume Air Flow A Circuit. Algorithm Based Failures. Event information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    5 modeller

    S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)

    Vis modeller per årsmodell og motor (12)
    • Volvo S60 (2011–)2011Kun motor: B4204T6, B4204T7
    • Volvo S60 (2011–)2012–2014Kun motor: B4204T7
    • Volvo S80 (2007–)2010Kun motor: B4204T6
    • Volvo S80 (2007–)2011–2014Kun motor: B4204T6, B4204T7
    • Volvo V60 (2011–)2011Kun motor: B4204T6, B4204T7
    • Volvo V60 (2011–)2012–2014Kun motor: B4204T7
    • Volvo V70 (2008–)2010Kun motor: B4204T6
    • Volvo V70 (2008–)2011Kun motor: B4204T6, B4204T7
    • Volvo V70 (2008–)2012–2014Kun motor: B4204T7
    • Volvo XC60 (2009–)2010Kun motor: B4204T6
    • Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
    • Volvo XC60 (2009–)2013–2015Kun motor: B4204T7

    Hva betyr feilkoden?

    This is an event-driven code, meaning an information code that does not point to a fault in the module where it is active. It is stored when the air flow sensor signal is wrong during driving. The code is a knock-on effect of another fault, so the underlying fault is repaired first. It normally does not need clearing, because it disappears once the conditions no longer apply.

    Mulige årsaker

    • Loose connection or corrosion in the connections
    • Contact resistance in the connector terminals on the mass air flow sensor
    • Damaged mass air flow sensor
    • Dirty mass air flow sensor
    • Air duct has come loose between the mass air flow sensor and the throttle body

    Hva du kan gjøre

    1. 1Read the other fault codes stored in the control module and look for air flow or intake faults, since the underlying fault should be repaired first
    2. 2Check that the connectors at the mass air flow sensor are fully engaged and free from corrosion
    3. 3Look for cracks and loose clamps on the air duct between the mass air flow sensor and the throttle body
    4. 4Check whether the mass air flow sensor is dirty
    5. 5If the code comes back after the underlying fault is repaired, have a workshop check the mass air flow sensor

    Symptomer du kan merke1

    • No noticeable symptoms for the driver

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.