VOLVO
ECM-P010602 - Manifold Absolute Pressure/Barometric Pressure Sensor Circuit Range/Performance. General Failure Information. General signal failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
Hva betyr feilkoden?
The ECM measures the intake pressure with an air pressure sensor and compares the reading with a calculated model. The code is stored when the reading strays too far from the model, and The fault concerns a general signal problem from the pressure sensor.
Mulige årsaker
- Contact resistance in the connector terminal
- Damaged air pressure sensor in the intake pipe
Hva du kan gjøre
- 1Read and note the code, clear it and road test, including varied driving, to see whether it returns
- 2Look for cracks and loose clamps on the hoses near the intake pipe
- 3Check that the connectors at the pressure sensor are fully engaged and free from oxidation
- 4If you have diagnostic equipment, read the pressure sensor value in live data while driving and check that it follows the throttle
- 5If the fault remains, have a workshop check the pressure sensor
Symptomer du kan merke3
- Engine warning lamp (check engine) lit or behaving abnormally
- The car runs poorly and lacks power
- The engine hesitates, surges or runs unevenly during acceleration or steady speed
Hva feilen kan påvirke2
- The signal from the intake pressure sensor is replaced by a model-based value
- Load and air flow are calculated without the air pressure sensor signal
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.