VOLVO
ECM-P010664 - Manifold Absolute Pressure/BARO Sensor Range/Performance. Algorithm Based Failures. Signal plausibility failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The ECM measures the intake pressure with an air pressure sensor. The code is stored when the sensor reading is too low compared with the value the model calculates. The fault is thus an implausible, too-low reading from the sensor, and the control module then ignores that sensor signal for load and airflow calculations.
Mulige årsaker
- Poor contact at the connector terminals
- Hose fitted incorrectly
- Air pressure sensor in the intake pipe has failed
Hva du kan gjøre
- 1Read and note the code, clear it and road test to see whether it returns
- 2Look for leaks and loose connections at the intake pipe hoses
- 3Check that the sensor connector is firmly seated and free from oxidation
- 4If you have diagnostic equipment, read the intake pressure in live data with the engine running; it should read lower than atmospheric pressure
- 5If the fault remains, have a workshop check the pressure sensor
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke2
- The sensor signal is replaced by a constant value
- Load and air flow are calculated independently of the air pressure sensor
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.