VOLVO
ECM-P010668 - Manifold Absolute Pressure/BARO Sensor Range/Performance. Algorithm Based Failures. Event information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (12)
- Volvo S60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4204T7
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011–2014Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4204T7
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4204T7
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
This is an event-driven code, meaning an information code that does not point to a fault inside the control module where it is active. It is set when the air pressure sensor reading strays too far from the calculated model. The code is a knock-on effect, so the underlying fault is repaired first. It does not need clearing, because it disappears once the conditions no longer apply.
Mulige årsaker
- Contact resistance at the sensor terminals
- Hose fitted wrongly
- Sensor in the intake pipe damaged
Hva du kan gjøre
- 1Look for other fault codes on the intake pressure sensor or the intake system and deal with those first
- 2Check that the hoses to the intake pipe are correctly fitted and not leaking
- 3Check that the sensor connector sits firmly and is free from oxidation
- 4Have a workshop check the pressure sensor if the code remains once the underlying fault has been repaired
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.