VOLVO
ECM-P011000 - Intake Air Temperature Sensor 1 Circuit. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (13)
- Volvo S60 (2011–)2011–2014Kun motor: B6304T4
- Volvo S60 (2011–)2015Kun motor: B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007Kun motor: B6324S
- Volvo S80 (2007–)2008–2009Kun motor: B6304T2, B6324S
- Volvo V60 (2011–)2011–2014Kun motor: B6304T4
- Volvo V60 (2011–)2015Kun motor: B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2008–2009Kun motor: B6304T2, B6324S
- Volvo XC60 (2009–)2009–2010Kun motor: B6304T2
- Volvo XC60 (2009–)2011–2015Kun motor: B6304T4
- Volvo XC70 (2008–)2008Kun motor: B6324S
- Volvo XC70 (2008–)2009Kun motor: B6304T2, B6324S
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
The ECM measures the intake air temperature with an air temperature sensor in the intake pipe and checks the sensor's DC voltage. The code is stored when an incorrect value persists for a set time or over two or more consecutive drive cycles.
Mulige årsaker
- Break in the signal or ground wire
- Contact resistance and oxidation in the connections
- Signal wire shorted to supply voltage
- Damaged intake air temperature sensor, including the one inside the mass air flow sensor
Hva du kan gjøre
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check the connector at the sensor, which sits in the boost pressure sensor, for contact resistance and oxidation
- 3With a multimeter, check that the signal wire has no break and is not shorted to supply voltage
- 4If you have diagnostic equipment, read the intake air temperature in live data at idle and check that it is reasonable
- 5If the code returns after clearing and a road test, have a workshop replace the boost pressure sensor
Symptomer du kan merke1
- The eco indicator lamp in the instrument panel lights up
Hva feilen kan påvirke1
- The control module uses the fuel temperature in place of the intake air temperature
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.