VOLVO
ECM-P011168 - Intake Air Temperature Sensor 1 Circuit Range/Performance (Bank 1). Algorithm Based Failures. Event information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (12)
- Volvo S60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4204T7
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011–2014Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4204T7
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4204T7
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
This is an event-controlled fault code that only works as an information record and does not mean that the control module has a fault. At start-up the engine control module saves the values from the intake, fuel and engine temperature sensors and compares them with each other.
Mulige årsaker
- The code is set as a subsequent fault of other fault codes, not by a separate fault in the control module
Hva du kan gjøre
- 1Read which other fault codes are stored in the control module
- 2Repair the root fault first; this code is a subsequent fault and should not be investigated separately
- 3Road test the vehicle and read the fault codes again. The code can be cleared once the root fault has been repaired
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.