Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P011624
    VOLVO

    ECM-P011624 - Engine Coolant Temperature Sensor 1 Circuit Range/Performance. General Signal Failures. Signal stuck high

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    5 modeller

    S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)

    Vis modeller per årsmodell og motor (12)
    • Volvo S60 (2011–)2011Kun motor: B4204T6, B4204T7
    • Volvo S60 (2011–)2012–2014Kun motor: B4204T7
    • Volvo S80 (2007–)2010Kun motor: B4204T6
    • Volvo S80 (2007–)2011–2014Kun motor: B4204T6, B4204T7
    • Volvo V60 (2011–)2011Kun motor: B4204T6, B4204T7
    • Volvo V60 (2011–)2012–2014Kun motor: B4204T7
    • Volvo V70 (2008–)2010Kun motor: B4204T6
    • Volvo V70 (2008–)2011Kun motor: B4204T6, B4204T7
    • Volvo V70 (2008–)2012–2014Kun motor: B4204T7
    • Volvo XC60 (2009–)2010Kun motor: B4204T6
    • Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
    • Volvo XC60 (2009–)2013–2015Kun motor: B4204T7

    Hva betyr feilkoden?

    After engine start the control module works out a theoretical coolant temperature from the time since start, engine speed and load. If the sensor signal is static and does not match that value, the fault code is set. It is often set together with another fault code for the coolant temperature sensor.

    Mulige årsaker

    • Contact resistance and oxidation in the connector
    • Damaged coolant temperature sensor

    Hva du kan gjøre

    1. 1Read all fault codes for the coolant temperature sensor, since this code is often set together with another
    2. 2Read the fault code status with the ignition on and then clear the code. Road test the vehicle to see whether it returns
    3. 3Check the connector at the coolant temperature sensor for contact resistance and oxidation
    4. 4If you have a diagnostic tool: read the coolant temperature in live data during warm-up. A value that stays still suggests the sensor may be damaged
    5. 5Check the coolant level and the antifreeze protection, since a frozen sensor can produce this code
    6. 6If the connector is in order and the fault remains, have a workshop check or replace the sensor

    Symptomer du kan merke1

    • The engine is difficult to start and cranks slowly on starting

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.