Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P01162A
    VOLVO

    ECM-P01162A - Engine Coolant Temperature Sensor 1 Circuit Range/Performance. General Signal Failures. Signal stuck in range

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    8 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (34)
    • Volvo S60 (2011–)2011Kun motor: D5204T2, D5244T10
    • Volvo S60 (2011–)2012Kun motor: D5204T3, D5244T11, D5244T15
    • Volvo S60 (2011–)2013Kun motor: D5204T7
    • Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5, D5204T7
    • Volvo S80 (2007–)2009Kun motor: D5244T10
    • Volvo S80 (2007–)2010Kun motor: D5244T10, D5244T14, D5244T19
    • Volvo S80 (2007–)2011Kun motor: D5204T2, D5244T10
    • Volvo S80 (2007–)2012Kun motor: D5204T3, D5244T11, D5244T15
    • Volvo S80 (2007–)2013Kun motor: D5204T7
    • Volvo S80 (2007–)2014Kun motor: B4204T11, B4204T12, B4204T15, D4204T5, D5204T7
    • Volvo S80 (2007–)2015Kun motor: B4204T11, B4204T12, B4204T15, D4204T5
    • Volvo V40 (2013–)2013–2014Kun motor: D5204T4, D5204T6
    • Volvo V40 (2013–)2015Kun motor: B4204T11, D4204T14, D5204T6
    • Volvo V40 Cross Country (2013–)2013–2014Kun motor: D5204T4, D5204T6
    • Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11, D4204T14, D5204T6
    • Volvo V60 (2011–)2011Kun motor: D5204T2, D5244T10
    • Volvo V60 (2011–)2012Kun motor: D5204T3, D5244T11, D5244T15
    • Volvo V60 (2011–)2013Kun motor: D5204T7, D82PHEV
    • Volvo V60 (2011–)2014Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5, D5204T7, D82PHEV
    • Volvo V60 (2011–)2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5, D5204T7, D82PHEV, D87PHEV
    • Volvo V70 (2008–)2009Kun motor: D5244T10
    • Volvo V70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T19
    • Volvo V70 (2008–)2011Kun motor: D5204T2, D5244T10
    • Volvo V70 (2008–)2012Kun motor: D5204T3, D5244T11, D5244T15
    • Volvo V70 (2008–)2013Kun motor: D5204T7
    • Volvo V70 (2008–)2014–2015Kun motor: B4204T11, D4204T5, D5204T7
    • Volvo XC60 (2009–)2010Kun motor: D5244T10, D5244T14, D5244T16
    • Volvo XC60 (2009–)2011Kun motor: D5204T2, D5244T10, D5244T16
    • Volvo XC60 (2009–)2012Kun motor: D5204T3, D5244T11, D5244T15, D5244T17
    • Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
    • Volvo XC70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T16
    • Volvo XC70 (2008–)2011Kun motor: D5204T2, D5244T10, D5244T16
    • Volvo XC70 (2008–)2012Alle motorer unntatt: B6304T4, B6324S4, B6324S5
    • Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, D4204T5

    Hva betyr feilkoden?

    The engine control module (ECM) checks the function of the coolant temperature sensor during warm-up after a cold start. If the value from the sensor has changed too little compared with the start temperature, the fault code is set.

    Mulige årsaker

    • Loose connection or oxidation in the connector
    • Open circuit on the control signal lead
    • Damaged battery relay
    • Damaged coolant temperature sensor
    • Contact resistance or oxidation in the connections

    Hva du kan gjøre

    1. 1Read the fault code status with the ignition on and check whether the fault is active. Then clear the code and road test the vehicle from a cold start
    2. 2Check that the fuses are intact
    3. 3Check the connector at the engine temperature sensor for looseness, contact resistance and oxidation
    4. 4If you have a diagnostic tool: read the engine temperature sensor signal in live data. An unreasonable value means a permanent fault, while a reasonable one means it is not active now
    5. 5If the connector is in order and the fault remains, have a workshop check the sensor, the battery relay and the wiring

    Symptomer du kan merke4

    • Automatic engine start/stop does not work while driving
    • Automatic engine start/stop does not work at idle
    • The Check engine light comes on or behaves abnormally
    • The engine is difficult to start and cranks slowly on starting

    Hva feilen kan påvirke2

    • The automatic engine start/stop function is switched off
    • The control module falls back on a default value or a calculation model

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.