VOLVO
ECM-P011662 - Engine Coolant Temperature Circuit Range/Performance. Algorithm Based Failures. Signal compare failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module (ECM) compares the value from the coolant temperature sensor with an estimated value. If the value deviates too much from the estimate, the fault code is set.
Mulige årsaker
- Contact resistance in the connector
- Damaged engine temperature sensor
Hva du kan gjøre
- 1Read the fault code status with the ignition on and check whether the fault is active. Then clear the code and road test the vehicle
- 2Check the connector at the engine temperature sensor for contact resistance and oxidation
- 3If you have a diagnostic tool: read the engine temperature in live data while driving. A value that does not follow engine load and warm-up suggests the sensor may be damaged
- 4If the connector is in order and the fault remains, have a workshop check or replace the engine temperature sensor
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- A calculated engine temperature is used
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.