Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P012000
    VOLVO

    ECM-P012000 - Throttle/Pedal Position Sensor A Circuit. General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    4 modeller

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (7)
    • Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
    • Volvo S80 (2007–)2010–2011Kun motor: D4164T
    • Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
    • Volvo V70 (2008–)2010–2011Kun motor: D4164T
    • Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
    • Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
    • Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5

    Hva betyr feilkoden?

    The engine control module (ECM) checks the analogue signal from the accelerator pedal position sensor. If the signal is faulty, the fault code is set, and the engine response to the throttle can be affected.

    Mulige årsaker

    • Open circuit in the signal cable or signal ground cable
    • Contact resistance or oxidation in the terminals
    • Signal cable shorted to supply voltage
    • Damaged accelerator pedal position sensor
    • A fault in the CAN network communication

    Hva du kan gjøre

    1. 1Read the fault code status with the ignition on and check whether the fault is active. Then clear the code and road test the vehicle
    2. 2Check the connector at the accelerator pedal for contact resistance and oxidation
    3. 3Check that the fuses are intact
    4. 4If you have a diagnostic tool: read the accelerator pedal position in live data while pressing the pedal down slowly. The value should follow the pedal smoothly
    5. 5If the fault remains, have a workshop check the accelerator pedal, the wiring and the communication on the CAN network

    Symptomer du kan merke2

    • Poor response from the accelerator
    • A message is shown in the display

    Hva feilen kan påvirke3

    • Engine output is limited
    • The control module uses the other signal if one signal is faulty
    • Cruise control is switched off while the fault is active

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    Vanlige kombinasjoner

    ECM-P012000
    ECM-P012200
    ECM-P012300

    ECM-P012000, ECM-P012200, ECM-P012300 Volvo – Elektroniskt Gasspjällshus Feilsøkingsguide

    VOLVO • 102 analyser

    Vis alle diagnostiske kombinasjoner
    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.