VOLVO
ECM-P012301 - Throttle/Pedal Position Sensor A Circuit High Input. General Failure Information. General electrical failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (8)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: D4164T
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
This code concerns accelerator pedal position sensor A, where the signal from the sensor is too high. Contact faults or a damaged sensor can cause it, affecting throttle response.
Mulige årsaker
- Contact resistance or oxidation in the connectors
- Damaged accelerator pedal position sensor
Hva du kan gjøre
- 1Read the diagnostic and fault status for the code with the ignition on. Clear the code and road test the vehicle to see whether it returns
- 2Check the connector at the accelerator pedal position sensor for contact resistance and oxidation
- 3If you have a diagnostic tool: read the accelerator pedal signal in live data while pressing the pedal. A value that does not follow the pedal suggests the sensor is damaged
- 4If the connector is in order and the fault remains, have a workshop check or replace the accelerator pedal position sensor
Symptomer du kan merke4
- A message is shown in the display
- Poor acceleration, the engine feels sluggish
- The engine has poor performance and lacks power, especially when starting
- The engine hesitates, surges or runs unevenly during acceleration
Hva feilen kan påvirke1
- Engine torque is limited
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.