VOLVO
ECM-P013017 - O2 Sensor Circuit (Bank 1 Sensor 1). General Electrical Failures. Circuit voltage above threshold
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
This code concerns the bank 1, sensor 1 oxygen sensor circuit when the voltage is too high. It is set during engine braking with the accelerator released and can be caused by a damaged oxygen sensor.
Mulige årsaker
- Damaged heated oxygen sensor (HO2S)
Hva du kan gjøre
- 1Read the fault code status with the ignition on and check whether the fault is active. Then clear the code and road test the vehicle to see whether it returns
- 2Check the connector at the oxygen sensor for contact resistance and oxidation
- 3With the connector unplugged, use a multimeter to check that the signal wire is not short-circuited to positive
- 4If the connector is in order and the fault remains, have a workshop check or replace the oxygen sensor
Symptomer du kan merke1
- The Check engine light comes on or behaves abnormally
Hva feilen kan påvirke1
- A calculated value is used instead of the oxygen sensor signal
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.