VOLVO
ECM-P013200 - O2 Sensor Circuit High Voltage (Bank 1 Sensor 1). General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
12 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (37)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011Alle motorer unntatt: B4204T6, B4204T7, B5254T5, B6304T4
- Volvo S60 (2011–)2012Alle motorer unntatt: B4204T7, B5254T5, B6304T4
- Volvo S60 (2011–)2013–2014Alle motorer unntatt: B4204T7, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Alle motorer unntatt: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2010Kun motor: D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Kun motor: B4164T, D5204T2, D5244T10
- Volvo S80 (2007–)2012Kun motor: B4164T, B4164T2, D4162T, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013Kun motor: B4164T, B4164T2, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2014Alle motorer unntatt: B4204T6, B4204T7, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2015Alle motorer unntatt: B6304T4, B6324S4, B6324S5
- Volvo V40 (2013–)2013–2014Alle motorer unntatt: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Alle motorer unntatt: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: B4164T, D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011Alle motorer unntatt: B4204T6, B4204T7, B6304T4
- Volvo V60 (2011–)2012Alle motorer unntatt: B4204T7, B6304T4
- Volvo V60 (2011–)2013Alle motorer unntatt: B4204T7, B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Alle motorer unntatt: B4204T7, B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Alle motorer unntatt: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Kun motor: B4164T, D5204T2, D5244T10
- Volvo V70 (2008–)2012Alle motorer unntatt: B4204T7, B5254T10, B6304T4, B6324S5
- Volvo V70 (2008–)2013–2014Alle motorer unntatt: B4204T7, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Alle motorer unntatt: B5204T9, B6304T4
- Volvo XC60 (2009–)2010Kun motor: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Kun motor: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Kun motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013–2014Alle motorer unntatt: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2015Alle motorer unntatt: B4204T7, B5204T9, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011Kun motor: D5204T2, D5244T10, D5244T16
- Volvo XC70 (2008–)2012–2015Alle motorer unntatt: B6304T4, B6324S4, B6324S5
Hva betyr feilkoden?
This code means the front oxygen sensor (bank 1, sensor 1) or its signal wires are short-circuited, either to supply voltage or to ground. It is set while the engine runs and can be caused by a damaged oxygen sensor.
Mulige årsaker
- Signal cable shorted to supply voltage
- Ground lead shorted to supply voltage
- Damaged front heated oxygen sensor (HO2S)
Hva du kan gjøre
- 1Read the fault code status with the ignition on and check whether the fault is active. Then clear the code and road test the vehicle
- 2With the connector unplugged at the oxygen sensor, use a multimeter to check that the signal and ground wires are not short-circuited to positive
- 3Check the connectors at the oxygen sensor for contact resistance and oxidation. Do not use rust solvent spray or grease in the connector
- 4If the wiring is in order and the fault remains, have a workshop check or replace the oxygen sensor
Symptomer du kan merke3
- The Check engine light comes on or behaves abnormally
- The engine has poor performance and lacks power, especially when starting
- The engine hesitates, surges or runs unevenly at steady speed
Hva feilen kan påvirke1
- The control module uses a calculated value for the oxygen sensor
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.