Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P013321
    VOLVO

    ECM-P013321 - O2 Sensor Circuit Slow Response (Bank 1 Sensor 1). General Signal Failures. Signal too low

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    5 modeller

    S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)

    Vis modeller per årsmodell og motor (12)
    • Volvo S60 (2011–)2011Kun motor: B4204T6, B4204T7
    • Volvo S60 (2011–)2012–2014Kun motor: B4204T7
    • Volvo S80 (2007–)2010Kun motor: B4204T6
    • Volvo S80 (2007–)2011–2014Kun motor: B4204T6, B4204T7
    • Volvo V60 (2011–)2011Kun motor: B4204T6, B4204T7
    • Volvo V60 (2011–)2012–2014Kun motor: B4204T7
    • Volvo V70 (2008–)2010Kun motor: B4204T6
    • Volvo V70 (2008–)2011Kun motor: B4204T6, B4204T7
    • Volvo V70 (2008–)2012–2014Kun motor: B4204T7
    • Volvo XC60 (2009–)2010Kun motor: B4204T6
    • Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
    • Volvo XC60 (2009–)2013–2015Kun motor: B4204T7

    Hva betyr feilkoden?

    Although the code is named for a low signal from the front oxygen sensor in bank 1, it is set when the sensor responds too quickly as the mixture changes. The ECM checks the sensor's wear and tests it while driving. The code is only stored once the ECM has started the test and the conditions for it have been met.

    Mulige årsaker

    • Short circuit between the sensor's current-carrying wires
    • Open circuit in the sensor signal wire
    • Open circuit in the wire that supplies the sensor's calibration current
    • Damaged front oxygen sensor

    Hva du kan gjøre

    1. 1Read the code, clear it and road test the car to see whether it comes back
    2. 2Check that the connector to the front oxygen sensor is fully engaged and free from oxidation; do not use rust solvent spray or grease in the connector
    3. 3Use a multimeter to check that the wires to the oxygen sensor have no open circuit and are not shorted to each other
    4. 4If you have a diagnostic tool: check in live data that the oxygen sensor signal follows the switches between rich and lean mixture smoothly, without dropouts
    5. 5If the fault remains after these checks, try a new front oxygen sensor

    Symptomer du kan merke1

    • Check engine light (MIL) on

    Hva feilen kan påvirke1

    • Catalytic converter diagnostics are disabled

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.