VOLVO
ECM-P013416 - O2 Sensor Circuit No Activity Detected (Bank 1 Sensor 1). General Electrical Failures. Circuit voltage below threshold
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (12)
- Volvo S60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4204T7
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011–2014Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4204T7
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4204T7
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
Although the code is named for a low voltage, it is set when the signal from the front oxygen sensor in bank 1 is outside its permitted operating range, or when the sensor's pre-heating voltage disturbs the signal. The engine control module (ECM) monitors the sensor signal while driving and only sets the code once the test has started and the conditions are met.
Mulige årsaker
- Signal wire shorted to the pre-heating circuit
- Ground wire shorted to the pre-heating circuit
- Damaged front oxygen sensor
Hva du kan gjøre
- 1Read the code, clear it and road test the car to see whether it comes back
- 2Use a multimeter to check that the wires to the oxygen sensor are not shorted to each other, especially the signal wire against the pre-heating wires
- 3Check that the ground wire to the oxygen sensor is not shorted to the pre-heating circuit
- 4If you have a diagnostic tool: read the oxygen sensor signal in live data with the engine running and check that it is not stuck outside the normal range
- 5If the wiring is intact, replace the front oxygen sensor
Symptomer du kan merke1
- Check engine light (MIL) on
Hva feilen kan påvirke2
- Front oxygen sensor control is switched off
- Catalytic converter diagnostics are disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.