VOLVO
ECM-P013513 - O2 Sensor Heater Circuit (Bank 1 Sensor 1). General Electrical Failures. Circuit open
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011–2015Kun motor: D4162T
- Volvo S80 (2007–)2012–2015Kun motor: D4162T
- Volvo V40 (2013–)2013–2015Kun motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: D4162T
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011–2015Kun motor: D4162T
- Volvo V70 (2008–)2012–2015Kun motor: D4162T
Hva betyr feilkoden?
The engine control module (ECM) monitors the heater in the front oxygen sensor in bank 1. The code is set when the signal to the sensor heater is incorrect, in this case because the circuit is broken. The ECM receives information from the sensor about the fuel/air mixture, so a broken heater circuit can affect how quickly the sensor warms up.
Mulige årsaker
- Contact resistance or oxidation in the connections
- Open circuit in the ground wire
- Damaged oxygen sensor
Hva du kan gjøre
- 1Read the code, clear it and road test the car to see whether it comes back
- 2Check that the fuse for the oxygen sensor heater is intact
- 3Use a multimeter to check that the ground wire to the oxygen sensor has no open circuit
- 4Check the connectors at the oxygen sensor for contact resistance and oxidation; do not use rust solvent spray or grease
- 5If the wiring is intact, replace the front oxygen sensor
Symptomer du kan merke1
- Check engine light (MIL) on
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.