VOLVO
ECM-P013617 - O2 Sensor Circuit (Bank 1 Sensor 2). General Electrical Failures. Circuit voltage above threshold
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
Although the code is named for a high voltage, it concerns the signal from the oxygen sensor in bank 1, sensor 2, which is incorrect. The engine control module (ECM) uses the signal to assess the mixture in the exhaust and sets the code when it is incorrect, after the test has started. The ECM then calculates a value for the mixture instead.
Mulige årsaker
- Signal shorted to voltage
- Damaged oxygen sensor
Hva du kan gjøre
- 1Read the code, clear it and road test the car to see whether it comes back
- 2Switch the ignition off and use a multimeter to check that the signal wire between the control module and the oxygen sensor has no open circuit
- 3Check that the signal wire has no contact with battery voltage
- 4If the wire is intact, replace the oxygen sensor
Symptomer du kan merke1
- Check engine light (MIL) on
Hva feilen kan påvirke1
- The engine control module uses a calculated value for the mixture
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.