VOLVO
ECM-P013968 - O2 Circuit Slow Response (Bank 1, Sensor 2). Algorithm Based Failures. Event information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
6 modellerS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2011–2014Kun motor: B6304T4
- Volvo S60 (2011–)2015Kun motor: B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2008–2009Kun motor: B6304T2
- Volvo V60 (2011–)2011–2014Kun motor: B6304T4
- Volvo V60 (2011–)2015Kun motor: B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2008–2009Kun motor: B6304T2
- Volvo XC60 (2009–)2009–2010Kun motor: B6304T2
- Volvo XC60 (2009–)2011–2015Kun motor: B6304T4
- Volvo XC70 (2008–)2009Kun motor: B6304T2
Hva betyr feilkoden?
This is an event-controlled information code, and it does not indicate a fault in the engine control module. The ECM monitors the oxygen sensor control and sets the code if the sensor reacts more slowly than expected during fuel cut-off. The code is intended as information.
Mulige årsaker
- No repair is needed for this code, as it reflects information only
Hva du kan gjøre
- 1If the car runs normally, nothing needs to be done; read the code and clear it
- 2Road test the car and read the code again to see whether it comes back
- 3If the code returns and the car behaves differently, have a workshop check the oxygen sensor control
Symptomer du kan merke1
- Check engine light (MIL) on
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.