VOLVO
ECM-P013A00 - O2 Sensor Slow Response - Rich to Lean (Bank 1 and Sensor 2). General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (39)
- Volvo S60 (2011–)2011Kun motor: B4204T6, B4204T7, B5254T5, B6304T4
- Volvo S60 (2011–)2012Kun motor: B4204T7, B5254T5, B6304T4
- Volvo S60 (2011–)2013Kun motor: B4204T7, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2014Alle motorer unntatt: B4164T, B4164T2, B4164T3, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Alle motorer unntatt: B4164T, B4164T2, B4164T3, D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2010Kun motor: B4204T6, B6304T2, B6324S, B6324S2, B8444S
- Volvo S80 (2007–)2011Kun motor: B4204T6, B4204T7, B6304T4, B6324S4, B6324S5, B8444S
- Volvo S80 (2007–)2012Kun motor: B4204T6, B4204T7, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013Kun motor: B4204T6, B4204T7, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2014Alle motorer unntatt: B4164T, B4164T2, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Alle motorer unntatt: B4164T, D4162T, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Kun motor: B4204T11, B5204T8, B5204T9, D4204T14
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B4164T, D4162T, D5204T6
- Volvo V60 (2011–)2011Kun motor: B4204T6, B4204T7, B6304T4
- Volvo V60 (2011–)2012Kun motor: B4204T7, B6304T4
- Volvo V60 (2011–)2013Kun motor: B4204T7, B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Kun motor: B4204T11, B4204T12, B4204T15, B4204T7, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4, D4204T5
- Volvo V60 (2011–)2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Kun motor: B4204T6, B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011Kun motor: B4204T6, B4204T7, B6304T4, B6324S5
- Volvo V70 (2008–)2012Kun motor: B4204T7, B6304T4, B6324S5
- Volvo V70 (2008–)2013Kun motor: B4204T7, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2014Kun motor: B4204T11, B4204T7, B5204T9, B6304T4, B6324S5, D4204T5
- Volvo V70 (2008–)2015Kun motor: B4204T11, B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2010Alle motorer unntatt: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Alle motorer unntatt: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Alle motorer unntatt: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Kun motor: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Alle motorer unntatt: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Alle motorer unntatt: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2013Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, B6304T4, B6324S4, B6324S5, D4204T5
- Volvo XC90 (2003–)2010Kun motor: B8444S
- Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012–2014Kun motor: B6324S5
Hva betyr feilkoden?
This is an event-controlled information code, and it does not always mean a real fault. The engine control module (ECM) follows how well the rear oxygen sensor in bank 1 keeps up when the mixture switches from rich to lean. The sensor may react too slowly at the switch, and this is only checked in certain driving cases with fuel cut-off.
Mulige årsaker
- Contact resistance or oxidation in the connections
- Damaged or dirty rear oxygen sensor
- Damaged middle oxygen sensor, on cars with three oxygen sensors
Hva du kan gjøre
- 1If the car runs normally, nothing needs to be done; read the code and clear it
- 2Check the connector to the rear oxygen sensor for contact resistance and oxidation; do not use rust solvent spray or grease
- 3Road test the car, preferably with some decelerations where the accelerator is fully released, and read the code again
- 4If you have a diagnostic tool: check in live data that the rear sensor signal changes when the accelerator is released
- 5If the code returns and the car behaves differently, have a workshop check the oxygen sensor control
Symptomer du kan merke1
- Check engine light (MIL) on
Hva feilen kan påvirke1
- The engine control module uses a calculated value for the mixture
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.