VOLVO
ECM-P015400 - O2 Circuit No Activity Detected (Bank 2, Sensor 1). General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (11)
- Volvo S80 (2007–)2007–2010Kun motor: B6324S, B8444S
- Volvo S80 (2007–)2011Kun motor: B6324S5, B8444S
- Volvo S80 (2007–)2012–2015Kun motor: B6324S5
- Volvo V70 (2008–)2008–2010Kun motor: B6324S
- Volvo V70 (2008–)2011–2014Kun motor: B6324S5
- Volvo XC60 (2009–)2010Kun motor: B6324S
- Volvo XC60 (2009–)2011–2015Kun motor: B6324S5
- Volvo XC70 (2008–)2008–2010Kun motor: B6324S
- Volvo XC70 (2008–)2011–2015Kun motor: B6324S5
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
The engine control module (ECM) checks the front oxygen sensor in bank 2, the cylinder row furthest to the rear near the passenger compartment. The code is set when the control module registers that the sensor does not activate at all or activates too slowly.
Mulige årsaker
- Contact resistance in the connections
- Damaged front oxygen sensor
Hva du kan gjøre
- 1Read the code, clear it and road test the car to see whether it comes back
- 2Check the connector at the sensor in bank 2 for contact resistance and oxidation; do not use rust solvent spray or grease
- 3If the fault remains after this check, try a new front oxygen sensor in bank 2
Symptomer du kan merke1
- Check engine light (MIL) on
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.