VOLVO
ECM-P016800 - Engine Fuel Temperature Too High. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
Each fuel injector has a built-in fuel temperature sensor, and the engine control module (ECM) receives the temperatures via LIN communication. The control module compares the values with permitted limits and sets the code when cylinder 4's injector reports a temperature above the highest permitted value.
Mulige årsaker
- Loose connection or oxidation in the connections
- Cylinder 4's injector is damaged
Hva du kan gjøre
- 1Read the fault codes; if there are codes for communication with the fuel injectors, fix those first, as this code is then a secondary fault
- 2Check the connectors to the fuel injector for cylinder 4 for looseness, contact resistance and oxidation
- 3Clear the code, road test the car and read the codes again to see whether it comes back
- 4If no fault is found in these checks, the fuel injector for cylinder 4 must be replaced
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- The control module takes the reading from another injector instead
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.