Hva betyr feilkode ECM-P017400?

Diagnose og feilkodedefinisjon for ECM-P017400 (Volvo S80 (2007–), Volvo S80 (2007–), Volvo S80 (2007–)). Bestill reparasjon hos OBD Tuning.

VOLVO

ECM-P017400 - System Too Lean (Bank 2). General Failure Information. No sub type information

System

Motorstyring (ECM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

5 modeller

S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

Vis modeller per årsmodell og motor (13)

Hva betyr feilkoden?

The code applies to bank 2, the cylinder row furthest to the rear. The ECM gets mixture information from the oxygen sensor across different load ranges, and the code is set when the mixture becomes too lean and the adaptations for bank 2 reach an end position.

Mulige årsaker

Too high ethanol content in the fuel
Air leak in the intake pipe
Air leak in the exhaust pipe
Low fuel pressure
Damaged mass air flow sensor
Incorrectly fitted or damaged oil dipstick, causing an air leak

Hva du kan gjøre

1Read the code, clear it and road test the car to see whether it comes back
2Check the intake and exhaust systems for air leaks
3Check that the dipstick is seated correctly in its tube and that air does not leak around it
4If the fuel adaptations for bank 2 are clearly shifted towards lean at idle, this points to an air leak
5Have a workshop check the fuel pressure and the mass air flow sensor with diagnostic equipment

Symptomer du kan merke4

Check engine light (MIL) on
Poor performance
The engine misfires
High idle speed

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.