VOLVO
ECM-P018500 - Fuel Temperature Sensor "B" Circuit. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The control module (ECM) compares the fuel temperature readings from the sensors in the injectors with each other. The code is set when one of the sensors shows a different value from the other three, which may be caused by a damaged injector on cylinder 4. The fault normally gives no noticeable symptoms for the driver.
Mulige årsaker
- Damaged injector on cylinder 4
Hva du kan gjøre
- 1Read and clear the code, then run the engine for a while to see whether it returns
- 2If you have a diagnostic tool: compare the temperature from each injector in live data and see which one differs from the other three
- 3Check that the connector to the injector on cylinder 4 is secure and free from oxidation
- 4If the fault remains after these checks, have a workshop with diagnostic equipment check the injector on cylinder 4
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.