VOLVO
ECM-P018600 - Fuel Temperature Sensor "B" Circuit Range/Performance. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The code concerns the fuel temperature from one of the sensors in the injectors deviating. The engine control module compares the sensors with each other, and when one of them gives a value that differs from the other three, the code is set. The cause may be a damaged injector on cylinder 2.
Mulige årsaker
- Damaged injector on cylinder 2
Hva du kan gjøre
- 1Read and clear the code, then run the engine for a while to see whether it returns
- 2If you have a diagnostic tool: compare the temperature from each injector in live data and see whether cylinder 2 deviates from the others
- 3Check that the connector to the injector on cylinder 2 is secure and free from oxidation
- 4If the fault remains after these checks, have a workshop with diagnostic equipment check the injector on cylinder 2
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.