VOLVO
ECM-P019164 - Fuel Rail Pressure Sensor A Circuit Range/Performance. Algorithm Based Failures. Signal plausibility failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (3)
Hva betyr feilkoden?
The control module (ECM) controls the fuel pressure in the fuel rail through the fuel pump and a pressure regulator valve, and checks whether the sensor signal is plausible. The code is set when the pressure does not change as expected or shows an offset while the engine is switched off. The signal is therefore judged to be implausible.
Mulige årsaker
- Poor contact or oxidation in the connections to the pressure regulator valve
- Clogged fuel filter
- Damaged fuel pressure regulator valve
- Damaged fuel pump
- Damaged fuel pressure sensor
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Read and clear the code, then start the engine to see whether it returns
- 3Check the connectors at the pressure regulator valve for oxidation and looseness
- 4If you have a diagnostic tool: read the fuel pressure in live data with the engine switched off and the ignition on, and see whether the value stays steady
- 5If the fault remains, a workshop should check the fuel pump and the fuel filter
Symptomer du kan merke2
- Message in the display together with a warning symbol
- Poor performance and lack of power
Hva feilen kan påvirke1
- Engine torque may be limited
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.